Support User Manuals

Sierra Wireless 20070914 Cell Phone User Manual

Open as PDF

of 203

Hardware Installation of the PinPoint X

Rev 3.0B Feb.08 24

connectingthemodemtoahuborswitchyoushouldusea

straightthroughcableorusetheuplinkportonthehubor

switchwithacross‐overcable.

Figure 4-5: Serial

Theserialportcanbeconnecteddirectlytomostcomputersor

otherdevicesusingastandardstraightthroughcable.Ifyou

haveaDCEdevice,youwillneedanullmodemornull

modemcable.

Figure 4-6: USB

YourPinPointX’sfull‐speed(12Mbit)USB2.0portcanbe

connecteddirectlytomostcomputersorotherdevicesusinga

standardfull‐speedUSB2.0cable.Ifthecomputerordevice

youareconnectingorthecableisnotratedforfull‐speed,the

modemwillcommunicateata

reducedspeedtomatch.The

PinPointXfunctionsasadevice,notahost.

Whenitisconnectedtoacomputer,theUSBportshouldbe

seenasaCOMportorEthernetportaftertheapplicabledriver

isinstalled.

ThePinPointXhasastandardBconnector.

Figure 4-7: I/O

YourPinPointXalsohasanI/Oportwithdigitalinputs,analog

inputs,andrelayoutputswhichcanbeconnectedtoexternal

devices.

previous next