Support User Manuals

Sierra Wireless 20070914 Cell Phone User Manual

Open as PDF

of 203

Configuration Commands

Rev 3.0B Feb.08 139

requests.n=0:Disabled.TheRavenXwillnotsendout

repliestoDHCPrequests.

Tip: For PPPoE, set *DHCPSERVER=0.

*HOSTAUTH=n

HostAuthenticationMode:UsePAPorCHAPtorequestthe

userloginandpasswordduringPPPorCHAPnegotiationon

thehostconnection.Theusernameandpasswordsetin

*HOSTUIDand*HOSTPWwillbeused.

• n=0:DisablePAPorCHAPrequest(Default).

• n=1:PAPandCHAP.

• n=2:CHAP

Tip: For PPPoE, set *HOSTAUTH=1 or *HOSTAUTH=2.

*HOSTNETMASK=n.n.n.n

Subnetmaskforthehostinterface.Allowscommunication

withasubnetbehindthehostinterface.

• n.n.n.n=subnetmask,example255.255.255.0.

*HOSTPEERIP=d.d.d.d

SetorquerytheIPaddressthatcanbeusedtodirectlycontact

thePinPointXonceacellularconnectionisestablished.Ifthis

valueisnotspecified,192.168.13.31willbeused.

• d.d.d.d=localorpeerIPaddressofthemodem.

Note: This is not normally used nor needed by user applications.

*HOSTPRIVIP=d.d.d.d

SetorquerytheprivateIPaddressthatistobenegotiatedby

the1xconnectionif*HOSTPRIVMODE=1.

• d.d.d.d=IPAddress

*HOSTPRIVMODE=n

Setorquerywhetheraprivateorpublic(network)IPistobe

usedwhentheHostinitiatesa1xconnectiontothemodem.

• n=0:Public(network)IPMode:WhentheHostinitiatesa

PPPconnection,thehostwillbegiventhenetworkIP

addressthatwasobtainedfromthecellularcarrierwhile

registeringonthenetwork.IfthenetworkissuesanewIP

previous next