Filter
Top Products
Time 119
Preliminary Layla850 P1B
Setting number formats
You can choose how you want the measurements and numbers
in your P910a to be displayed in all your applications. Distances
can be displayed using the imperial or the metric system and
different punctuation marks can be used as separators.
To set the number details
1. Select
> .
2. Select
Time > Set location
.
3. Select
Numbers
.
4. Choose separators and symbol positions from the drop-down
lists. You can tap the keyboard icon to find currency
symbols.
5. Tap
Done
.
Setting alarms
You can set up to three different alarms in your P910a. You can
choose to activate one of the preset alarms, or set a new alarm
with your own definitions.
You can choose to set a silent alarm, where only a message is
displayed when it goes off, or you can set a sound alert.
Alarms requires that the P910a is turned on. If you want to get
alarms in an environment where radio transmitters are not
allowed, you can set the P910a to flight mode, see ‘Flight mode’
on page 48.
Note If you have connected a stereo headset to the P910a, the
alarm will only be heard in the headset.
To activate an existing alarm
• Select the check box in the alarm slot. is displayed on the
status bar on the screen.
To set a new alarm
1. Select
>
.
2. Select one of the alarm slots.
3. Select
Time
and choose at what time you want the alarm to go
off. Confirm by tapping outside the time picker.
4. Select
When
and choose how often you want the alarm to go
off:
–
Once
The alarm will go off once only, at a time more than
24 hours from now but within the next eight days.
–
Next 24 hours
Within the next 24 hours.
–
Daily
Every day at the specified time.
–
Workdays
Every workday at the specified time.
–
Weekly
Every week at the specified time.
5. Select
Alarm sound
and choose a sound.
6. Select
Message
and choose a preset message or write a new
one.