Filter
Top Products
156 Control panel
Preliminary Layla850 P1B
New Dial-Up or High-Speed Dial-Up account
Your Internet Service Provider (ISP) supplies you with your
User
name
, your
Password
, and their
Phone number
, which your P910a
dials to connect to the Internet. If you have a High-Speed Dial-
Up account with your network operator you can increase the
speed of your connection by making settings on the
Speed
tab
under
Advanced
.
Tip To avoid having to change the phone number when you
travel abroad: enter the international dialling prefix (for
example '+') and the appropriate country code for your ISP.
For some accounts you may also need to make advanced
settings.
Select
Advanced
and enter settings on the tabs as described
below
Authentication
is used by some network operators to
identify the mobile phone connecting to their GPRS
network. There are different methods, or protocols,
for doing this.
Normal
: PAP (Password Authentication Protocol).
The user's username and password are transmitted
over the network in an unencrypted form.
Secure
: CHAP (Challenge Handshake
Authentication Protocol). The user's username and
password are never transmitted over the network.
None
: No authentication is required by the network
operator.
QoS
Check with your network operator before changing
any of the QoS (Quality of Service) settings.
The settings
Precedence
,
Delay
,
Peak rate
, and
Mean
rate
are all by default set to
Subscribed
, which means
that your operators default QoS (Quality of Service)
values will apply.
Reliability
is set as
Class 3
by
default.
GPRS Advanced tabs
Dial-Up and High-Speed Dial-Up Advanced tabs
Log in
The settings on this tab deal with IP and DNS addresses.
For an explanation of these settings, see
Log in
in the
‘GPRS Advanced tabs’ on page 155.
Script
As an alternative to entering your username and password
to access the Internet you may need to use a login script
stored on your P910a. Although uncommon, scripts may
be required by your Internet Service Provider (ISP).
Select the
Use login script
check box and enter the script
text in the
Script editor
.
If you select the check box
Plain text authentication
(required by some ISPs), the security of your connection
will decrease during the connection process. Once you
are connected, the security of your connection will be
restored.