Filter
Top Products
CommuniCorder 59
Preliminary Layla850 P1B
You can also press the Jog Dial, or, when the flip is open, tap the
capture button at the bottom of the screen to record a
video clip.
By default the video clips you record are stored internally in the
Unfiled
folder. Tap the folder menu to the right in the menu bar to
change the storage location to another location, for example, on
a Memory Stick. See ‘Folders’ on page 27 for more information
on using folders.
To send a video clip you have just recorded in flip closed, select
Send as MMS
from the flip closed context menu. In flip open, tap
.
Note Most operators only accept video clips of 10 seconds
length or 95 KB size.Use the Message video mode, or the Video
limit setting in Video mode to limit the file size.
Open the flip to access the full range of CommuniCorder
settings. With the flip open, the CommuniCorder is activated by
selecting
>
.
To delete the last video clip
1. Select
CommuniCorder > Delete clip
.
2. Confirm the delete operation.
To delete a video clip you have just recorded in flip closed,
select
Delete clip
from the flip closed context menu.
To manage video clips, tap to go directly to
Video
. See
‘Video’ on page 67 for more information.
Delay timer
CommuniCorder has a delay timer with a delay of 1-25 seconds.
The delay time is the time between the moment you activate the
shutter release and the moment when the recording starts.
To set the delay time
1. Tap
CommuniCorder > Preferences.
2. Tap and set the desired delay time
To record video with delay timer
1. Tap
CommuniCorder > Delay timer.
2. Press the camera button. The timer beeps for the set time and
a timer icon is shown before the recording is started.
When the delay timer is set, you will see the timer status icon
.
3. Tap
CommuniCorder > Delay timer
to deactivate the timer.
Video status
Above the viewfinder, you will find the video status. Icons show
whether the CommuniCorder is ready or busy, video quality, and
audio quality. A number indicates how much time you have left.
The calculation is based on the current settings plus available