Sprint Nextel NNTN9124A Cell Phone User Manual


 
122 10. microSD Card
Removing the microSD Card
1. Before you remove your memory card you need to
unmount it. Touch
> Settings >
SD card & phone storage > Unmount SD card
.
2. Once your phone confirms that it is safe to remove
the microSD card, remove the battery cover and
open the memory card slot cover.
3. Grasp the raised edge of the microSD card and
pull the card out.
4. Close the memory card slot cover and replace the
battery cover.
Formatting Your Memory Card
If you are having difficulty with a memory card, you may
format the card using your phone. This process
removes any data on the card and sets up a new folder
system.
1. Before you format your memory card you need to
unmount it. Select
> Settings >
SD card & phone storage > Unmount SD card
.
2. Select > Settings > SD card & phone
storage > Format SD card > Format SD card
.
Important:
Do not remove the memory card until you select
the
Unmount SD card
option under
SD card &
phone storage
. Removing the memory card
before selecting the
Unmount SD card
option
could result in loss of data.
Note:
The microSD card and its adapter can be easily
damaged by improper operation. Please be careful
when inserting, removing, or handling them.
WARNING:
The formatting procedure erases all the data on
the microSD card, after which the files CANNOT
be retrieved. To prevent the loss of important data,
please check the contents before you format the
card.
NNTN9124A_i1x_Rubicon_Nextel_UG.book Page 122 Thursday, June 16, 2011 2:58 PM