Filter
Top Products
12. Bluetooth Wireless 131
Bluetooth
Bluetooth Status Indicators
The Bluetooth status indicators on your phone’s display
screen shows your Bluetooth connection status at a
glance:
None
– Bluetooth is disabled (default status).
– Status indicator will be black when Bluetooth is
turned on, but no device is connected.
– Status indicator will turn light gray when
connected to a Bluetooth device.
Connecting and Disconnecting
Bluetooth Devices
Connect New Devices
To connect with a new device, you need to pair with it.
You only need to do this once for each device; to
connect again, see “Reconnect Devices” on page 132.
1.
Make sure the device you are pairing with is in
discoverable mode.
2.
Touch
> Settings > Wireless & networks >
Bluetooth settings
.
3.
Touch
Bluetooth
to turn on and scan. If Bluetooth is
already on, touch
Scan for devices
.
4.
Touch a device to connect.
5.
If necessary, touch
OK
, or enter the device passkey
(for example
0000
) to connect to the device. When
the device is connected, the Bluetooth connected
indicator appears in the notifications bar.
Note:
This feature requires an optional accessory.
Tip:
Refer to the guide that came with the device for details.
Note:
Using a mobile device or accessory while driving may
cause distraction and may be illegal. Always obey the
laws and drive safely.
NNTN9124A_i1x_Rubicon_Nextel_UG.book Page 131 Thursday, June 16, 2011 2:58 PM