Filter
Top Products
––––––––––––––––––––––––––––––––––––––––––––––––––––––– Step 3: Connect and Apply Power to Base Unit
Installation 19
CAUTION! Use only the AC adapter supplied with your cordless digital telephone.
2. Plug the AC adapter into a standard 120 VAC
wall outlet.
3. Route the power cord where it is not a trip
hazard, and where it cannot become chafed
and create a fire or electrical hazard.
4. Wrap the power cord around the notch on the
bottom of the base unit as shown at the right.
5. Check to see that the power LED is on,
indicating the telephone has power.
6. Before using your cordless digital telephone,
be sure to raise the antenna to the vertical
position.
1175
Raise to Vertical Position
1159