Filter
Top Products
Quick Reference –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
42
Strata DK Cordless Digital Telephone 5/99
Conferencing Calls
➤ To conference calls with stations only
As many as four stations can be conferenced on one [DN].
3. Announce the call. After dialing, you hear a single tone.
Note If the call was made with Tone Signaling
instead of Voice First Signaling, you hear
ringing tone.
If the called station does not answer, you receive a
recall ring (when your station or
[DN] is idle). The
ring is set by system programming.
4. Hang up The Line LED changes to steady when the called
station connects with the transferred call.
...or press
/LQH, [DN] +
to reconnect to the transferred
line before the call is
answered or busy tone is
received.
The Line LED changes to steady red when the called
station connects with the transferred call. After you
hang up, the Line LED begins to flash at the on-hold
rate or if you transferred the call from a [DN], the
[DN] LED goes out. The CO Line or [DN] camps onto
the called station and the called station receives a
warning tone.
You receive a recall ring when your station or [DN]
is
idle and camp-on is cancelled when the called station
user fails to answer within a predetermined time.
Repeat the procedure if necessary.
1. Press
&QI7UQ. You hear internal dial tone and the LED flashes at the
conference rate.
2. Dial a [DN]. The [DN] could be for a telephone or department.
3. Press
&QI7UQafter the party
answers.
All parties are conferenced and the [DN] LED from
which the conference originated lights steady.