Filter
Top Products
Call Forward ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
56
Strata DK Cordless Digital Telephone 5/99
Call Forward-Cancel
➤ To cancel any Call Forward mode except Call Forward-External
➤ Press the applicable &DOO)RUZDUG button so that its associated LED turns off
...or press [PDN] +
...or press 7$/..
Call Forward-External
This feature enables you to forward new incoming calls directed to your [PDN] to a
destination outside of the system. [PhDNs] assigned to your telephone do not Call Forward to
external destinations. Internal calls and transferred calls to your [PDN] also do not forward to
external destinations. Only incoming calls over CO Lines dedicated to your [PDN], private
CO Line, and/or Direct In Dial line calls are forwarded. The Call Forward-External destination
can be a telephone number over a CO Line, a station over a tie line, or a station within your
Strata DK system.
Any of the Call Forward modes can be set for your [PDNs] or [PhDNs] simultaneously with
Call Forward-External. This feature stores the calls to Station Speed Dial Code 49. Use the
Speed Dial storage procedures detailed in this chapter. When forwarding to an outside
destination include the CO Line (or CO Line Group) access code before the telephone number.
See Table 1 on page 95 for the CO Line/Line Group access codes. The LCR access code “9”
cannot be used.
3. Press
6SHHG'LDO
...or
.
You can omit this step if you pressed
&DOO)UZG
%XV\1$QV
in Step 1, and you do not want to change
the length of time that your telephone rings before it
forwards. Initially, your telephone rings 12 seconds
before it forwards.
4. Enter the time at which the
call are to be forwarded
(08~60 seconds).
You can omit this step and continue onto the next step
if you do not wish to change the amount of time your
telephone rings before it forwards.
5. Press
&DOO)UZG%XV\
1$QV
...or press 7$/..
The Call Frwd Busy/NAns LED lights steady red and
calls are forwarded to the stored station number.