Filter
Top Products
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Alert Signaling
Features 49
Alert Signaling
Alert Signaling enables you to send an alert sound to a predesignated (partner) station by
pressing a single button. This feature is based on the “buzz” key, where, for example, a
manager might alert his/her administrative assistant to enter the office.
You can have as many as four
$OHUW6LJQDO(s) to send or receive an Alert Signal to/from
other telephones. An Alert Signal is sent even if the alerted telephone is busy (on/off-hook) or
in the DND or Call Forward mode.
➤ To send an Alert Signal
➤ Press $OHUW6LJQDO. An alert tone sounds at the designated station.
Note The signal sounds even if the alerted telephone is busy (on or off hook) or in the DND
mode.
Automatic Busy Redial (ABR)
After reaching a busy outside number, you can activate Automatic Busy Redial (ABR) so that
the Strata DK system automatically redials that number for you at regular intervals. ABR is an
optional feature enabled in system programming. This feature may not be allowed on some (or
all) lines in your system depending on the telephone line type connected.
➤ To activate ABR
1. Press
$XWR%XV\5HGLDO The Auto Busy Redial LED flashes.
...or press
&QI7UQ + . You hear confirmation tone after you press &QI7 UQ +
.
2. Press
6SNU. The system redials the number every 30 or 60 seconds
(depending on system programming), up to 15 times.
With each attempt, the:
♦ Line and Spkr LEDs blink when the line is seized.
♦ Dial tone is heard over your speaker.
♦ Telephone number is redialed. If busy, ABR resets
and tries again.