Filter
Top Products
Step 4: Attach Belt Clip to Handset (optional) ––––––––––––––––––––––––––––––––––––––––––––––––––––––––
20
Strata DK Cordless Digital Telephone 5/99
Step 4: Attach Belt Clip to Handset (optional)
➤ To attach the belt clip to the handset
1. Snap the tabs of the belt clip
into the notches on the sides of
the handset.
2. Use the belt clip to attach the
handset to your belt or pocket
for convenient portability.
➤ To remove the belt clip
1. Pry one tab at a time from the
notch on the side of the handset.
2. Carefully lift the belt clip off.
Note The belt clip is designed to fit snugly onto the handset.
Step 5: Install Handset Battery Pack
1. Place a charged battery pack
onto the handset so that it slides
easily along the ridges.
If your battery is not charged,
see “Removing and Charging
Your Battery Pack” on Page 21.
2. Slide the battery pack up onto
the handset until it clicks into
place.
You are now ready to configure
your cordless digital telephone. See
“Configuration” on Page 25.
Lanyard Clip
R/VOL
MUTE
s
s
1160
1155