Filter
Top Products
Alarm Reset ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
48
Strata DK Cordless Digital Telephone 5/99
Voluntary Account Codes
Voluntary Account Codes are optional and can be entered after accessing a CO Line or during
a call that you originated or received. The outside party cannot hear the tones you are entering.
Voluntary Account Codes can be set in system programming to change the Toll Restriction
classification of your station. See your System Administrator for more information. If your
station is programmed not to verify Account Codes, you do not hear a confirmation tone.
➤ To use a Voluntary Account Code
Verified Account Codes
If the system is set for Verified Account Codes, you must enter specific codes when entering
Forced or Voluntary Account Codes. Verified Account Codes are established in system
programming or by designated stations.
Alarm Reset
Your Strata DK system can be connected to a facility alarm system. All telephones produce a
startling tone whenever this alarm is activated. Stations with an
$ODUP5HVHWbutton can
reset the alarm by pressing the
$ODUP5HVHWbutton.
1. Press
$FFRXQW&RGH Your conversation is not interrupted. Some telephones
require that you enter the account code before dialing
a telephone number. If a valid account code is not
entered, dialing external calls may be restricted.
...or
6SHHG'LDO+
...or
+ .
2. Enter the Account Code. You hear confirmation tone (one-half second duration)
if the code is valid. If the code is invalid, you hear two
short tones.
3. Repeat Steps 1 and 2 to enter
another account code (the last
code entered is recorded).
Notes
● Any digits dialed after the code has been entered
are treated as part of the outside telephone number.
● Voluntary Account Codes must be entered before
the call is disconnected.