Filter
Top Products
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– LCD Name/Number Display
Features 65
Subaddress
Subaddress digits may be required for dialing another department, or to send a call to
equipment, such as a printer. If you need to enter subaddress digits, follow these instructions:
➤ To make an outgoing call with a subaddress to an ISDN trunk
LCD Name/Number Display
This feature enables you to use your telephone to store a title (such as your name, telephone
number, location, etc.) in system memory. This title (e.g., LOBBY) displays on your station’s
LCD while it is idle, and it appears at other stations’ LCDs when they are called from your
station. Your name displays on other telephone LCDs when they are used to call your
telephone.
Name display information for non-LCD telephones or voice mail/auto attendant devices can
be stored from station 200. When name/number is recorded for non-LCD telephones or other
devices, their name/number is displayed on LCD telephones when called.
➤ To activate name/number information
1. Access an outside CO
line
2. Dial the number.
3. Press
6XE.The 6XE button informs the system that the following digits
are the subaddress.
4. Enter the subaddress.
5. Press
6WDUW. The dialed digits will not be sent until you press this button or
until the timer expires.
1. Press
7$/. + .
Current information appears on the display after the
call is released.
2. Press
7$/.. The new information is
stored and appears on the
display. For example, if
the name is “TOSHIBA
EXT. 200”, that appears
on the display.
TOSHIBA
EXT. 200
1203