Filter
Top Products
Two (Tandem) Line Connection –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
82
Strata DK Cordless Digital Telephone 5/99
Two (Tandem) Line Connection
Using a [DN] Button
This feature enables you to connect two lines, then drop out of the conversation.
➤ To connect two outside lines (using a [DN] button)
1. Press
&QI7UQ while
talking to an external
party on a [DN] button.
You hear dial tone, the [DN] LED flashes at the
conference rate.
2. Dial a line access code
and then the external
telephone number of the
other party (see
“Access
Codes” on Page 92).
Ask your System
Administrator for the
proper code to be used for
this type of call.
3. Press
&QI7UQ after the
party answers.
The [DN] LED lights steady and all parties are
conferenced.
Press [DN] and then
&QI
7UQ
to return to the
original call if you
receive a busy tone/no
answer.
You hear dial tone and the [DN] LED flashes at the
exclusive-hold rate.
4. Press
&QI7UQ and
hang-up.
The [DN] LED continues to flash at the exclusive-hold
rate and the two lines are connected. The LED turns off
when the external parties hang up.
5. Press
7$/.. If the public telephone company provides auto disconnect,
the connection may release automatically when the parties
hang up. If not, the lines must be supervised to be
disconnected.