Filter
Top Products
34
Adding Pauses or Waits
Calls to automated systems can require entry of a password or
account number. You can store the numbers to a Contacts entry,
along with special pause and wait characters.
1. From the Home Screen, touch
Contacts
.
2. Touch a contact, then touch
Edit
.
3. While entering a phone number in a contact entry, enter
the phone number up to the pause or wait, then touch
.
4. Touch an option:
• Add 2-Sec Pause
: Stops the dialing sequence for two
seconds, then automatically sends the remaining digits.
A “p” appears in the telephone number.
• Add Wait
: Stops the dialing sequence, waiting for further
input from you. A “w” appears in the telephone number.
5. After your entry, touch to save the contact entry.
Note:
Entering multiple pauses extends the length of a pause. For example,
two consecutive pauses equal a total pause of four seconds.
Remember that each pause counts as a digit towards the 48-digit
maximum for telephone numbers.
Sending a Name Card
1. From the Home Screen, touch
Contacts
.
2. Touch a contact, then touch
SEND NAME CARD
.
3. Select a sending method:
• Send via Bluetooth
: Sends the name card to a selected device.
• Send via Message
: Sends the name card in a message.
4. Touch
Send
to send the name card.
Finding a Contact
Finding a contact in landscape mode
1. From the Home Screen, touch
Contacts
.
2. The cursor appears in the
Search
field. Enter part or all of
the Contact name to see matching entries.
Tip:
You can also find a Contact with
Device Search
. For more information,
see “Phone Search” on page 94.
Insert
InsertInsert
Done