Open as PDF
Your phone includes support for Bluetooth, which can be used to connect your
phone to a wireless headset. You can also use it to transfer ﬁles between your
phone and other Bluetooth devices, such as another phone or a laptop. Not all
applications or devices can be supported because Bluetooth is an open forum
and different manufacturers have different standards and implementation.
By default, Bluetooth is disabled on your phone. If you enable Bluetooth and turn
off the phone, Bluetooth will be disabled. When you turn the phone on, Bluetooth
will automatically be enabled.
From idle mode, select Menu > Settings > Connections > Bluetooth.
Press the OK Key to set Bluetooth to On.
Go down to Discoverable and press the OK Key to set it to On.
Go down to My Bluetooth Info and enter the phone name.
Press the OK Key to save the settings.
Note: Set Discoverable to On to allow your phone to be found by other
From idle mode, select Menu > Settings > Connections > Bluetooth > Search
for new device.
Highlight a device from the list and press the OK Key.
To connect to the device, enter the passkey when prompted and press the Left
Soft Key for Pair.
There are two options for Bluetooth connection:
• Automatic: Set another Bluetooth device that is connecting to your phone as
an authorized device.
• Always Ask: Set another Bluetooth device that is connecting to your phone as
an unauthorized device that must ask before connecting.
Tip: Some devices don’t connect to another Bluetooth device automatically. You
need to highlight the device name in the My devices list and press the OK Key to
connect with it.
Before sending data, please conﬁrm the following two items:
• Bluetooth function is enabled.
• The paired device is visible, paired, and connected.
Select your desired ﬁle, press the Left Soft Key for Options, and select Send >
Select the target device from the device list, and press the OK Key to send
Enable Bluetooth function.
If the paired device tries to send a ﬁle to your phone, a pop-up dialogue will
appear on your screen.
Press the Left Soft Key for Yes to accept the incoming ﬁle, or press the Right
Soft Key for No to reject it.