![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/7e/27e4df2a-2443-43a6-a856-72e36112a2da/27e4df2a-2443-43a6-a856-72e36112a2da-bg5c.png)
BMC Software, Inc., Confidential and Proprietary Information
80 Application Enhancement Solutions Messages Manual
BMC44209I PERF % EXCEEDED jobname stepname psbname date time
Alert! This is an Alert category message.
Explanation: The value reported as the PERF% has exceeded the threshold
specified for the given job step.
System Action: Processing continues.
User Response: This message is for your information only. No action is necessary.
You might want to tune the database buffer pools, tune the logging environment, or
change the application program to improve the logging performance.
BMC44210I RETURNING CONTROL TO IMS PHYSICAL LOGGER
Explanation: The BATCH CONTROL FACILITY (BCF) Physical Logger could
not initialize. BCF attempts to return control to the IMS Physical Logger.
Note: This message is not issued if the IEFRDER DD statement is specified as
DUMMY or NULLFILE.
System Action: Processing continues.
User Response: This message is for your information only. No action is necessary.
BMC44211I DB = dbname DDN = ddname UNREGISTERED CPY
Alert! This is an Alert category message.
Explanation: The given database (dbname) is registered with DBRC. However,
the name of the data set (ddname) being used by this execution is not the name
registered with DBRC. IBM’s IMS APAR PL63425 must be installed for this
message to be issued.
System Action: Processing continues.
User Response: This message is for your information only. No action is necessary.
This message provides notification of the potential loss of recovery information.
Verify that the use of the unregistered database was intentional.
BMC44212I LOG DS USING TWI, DD = ddname
Alert! This is an Alert category message.
Explanation: The message indicates that the options selected for this job step
specified that tape write immediate mode should be used for the log data sets
(ddname) if they are being written to a buffered device. Tape write immediate mode
may result in significant performance degradation.
System Action: Processing continues.
User Response: This message is for your information only. No action is necessary.