9 - AUX PAGES
170
190-00357-00 Rev H
fuel required (REQ), range (RNG), and endur-
ance (ENDUR) is provided. You can change the
information displayed on the page by pressing
MENU and selecting the “Change Fields?”
option. If your 500W-series unit installation
includes connection to fuel sensors, additional
information items are presented when the
“Change Fields?” option is selected.
To perform trip planning operations:
1. Select “Trip Planning” from the Flight Planning
Page.
2. The current trip planning “leg mode” is dis-
played at the top of the page: “POINT TO
POINT” or “FPL LEG” (for a flight plan leg). To
change the leg mode, press MENU to display
an options window for the other leg mode, then
press ENT to accept the other leg mode.
Press MENU and use the options window to
select the other leg mode: Point-to-Point or
Flight Plan.
3a. For direct-to planning, verify that the “from”
waypoint field indicates “P.POS” (present
position). If necessary, press CLR to display
“P.POS”. Press ENT and the flashing cursor
moves to the “to” waypoint field. Turn the
small and large right knobs to enter the
identifier of the “to” waypoint and press ENT
to accept the waypoint.
OR,
3b. For point-to-point trip planning, turn the small
and large right knobs to enter the identifier
of the “from” waypoint. Once the waypoint’s
identifier is entered, press ENT to accept the
waypoint. The flashing cursor moves to the
“to” waypoint. Again, turn the small and
large right knobs to enter the identifier of
the “to” waypoint and press ENT to accept
the waypoint.
OR,
3c. For “flight plan leg” trip planning, turn the
small right knob to select the desired flight
plan (already stored in memory), by number.
Turn the large right knob to highlight the
“LEG” field and turn the small right knob to
select the desired leg of the flight plan, or select
“Cum” to apply trip planning calculations to
the entire flight plan.
4. Turn the large right knob to highlight the
departure time (DEP TIME) field.
5. Use the small and large right knobs to enter
the departure time. Press ENT when finished.
(Departure time may be entered in local or UTC
time, depending upon unit settings.
6. If necessary, use the small and large right
knobs to enter the departure date. Press ENT
when finished.
Flight Planning
