9 - AUX PAGES
181
190-00357-00 Rev H
Setup 1 Page
4. Press ENT when finished.
5. To reset the departure time, turn the large
right knob to highlight “Reset?” and press
ENT. This will reset the departure time to the
current time.
To view, use or reset total trip time:
1. Select “Flight Timers” from the Utility Page.
2. Turn the large right knob to highlight the
reset mode field, under “Total Trip Time”.
(The reset mode field indicates “Pwr-on” or
“GS>30kt”.)
3. Turn the small right knob to select the desired
reset mode. (“Pwr-on” resets trip time to zero
hours/minutes/seconds each time the 500W-
series unit is turned on. “GS>30kt” resets trip
time to zero after power on and when the GPS-
computed ground speed exceeds 30 knots.)
Turn the small right knob to select when the
trip timer resets: each time the 500W-series
unit is powered on or when ground speed
exceeds 30 knots.
In the case of a helicopter installation, the Total
Trip Criteria is “Power-on” or “In-air.”
4. Press ENT when finished.
5. To reset the total trip time, turn the large right
knob to highlight “Reset?” and press ENT.
Trip Statistics
To reset trip statistics readouts:
1. Select “Trip Statistics” from the Utility Page.
2. Press MENU to display an options window
with several reset options:
Press MENU to display an options window,
listing several reset options.
•Reset Trip? — Resets trip odometer and average
ground speed readouts
•Reset Max Speed? — Resets maximum speed
readout only
•Reset Odometer? — Resets odometer readout
only
•Reset All? — Resets all trip statistics readouts
3. Turn the large right knob to select the desired
reset option and press ENT.
