Filter
Top Products
112 Getting Connected
On the APNs screen, press MENU and then touch New APN.
In the Edit access point screen, enter the APN settings. Touch the APN setting
item to edit it.
Press MENU and then touch Save when you finish setting up the new APN.
Wi-Fi
Wi-Fi provides wireless Internet access over distances of up to 300 feet (100 meters).
To use Wi-Fi on your phone, you need access to a wireless access point or “hotspot”.
Note The availability and range of the Wi-Fi signal depends on the number, infrastructure,
and other objects through which the signal passes.
To turn Wi-Fi on and connect to a wireless network
1. Press HOME > MENU, and then touch Settings > Wireless controls.
2. Select the Wi-Fi check box to turn Wi-Fi on. The phone will scan for available
wireless networks.
3. Touch Wi-Fi settings. The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi networks are displayed in the
Wi-Fi networks section.
4. Touch a Wi-Fi network to connect. When you selected an open network, you
will be automatically connected to the network. If you selected a network
that is secured with WEP, enter the WEP (security) key and then touch
Connect.
Notes • The next time your phone connects to a previously accessed secured wireless
network, you will not be prompted to enter the WEP key again, unless you reset
your phone to its factory default settings.
• Wi-Fi networks are self-discoverable, which means no additional steps are required
for your phone to connect to a Wi-Fi network. It may be necessary to provide a
username and password for certain closed wireless networks.
3.
4.