Filter
Top Products
48 Using Phone Features and Managing Contacts
To make a call on the Dialer
1. Touch the keys on the dialer to enter the phone
number. As you enter numbers or letters, the
screen will display matches found based on the
phone keys you have touched.
The list is based on the contacts you have on
your phone and Call log.
Tip If the phone keypad is not open, touch
at the bottom of the screen.
If you touched a wrong number key, touch
to erase each subsequent digit of a number. To
erase the entire number, touch and hold .
Note After entering the first few digits and the number you are dialing is not in your
contacts, an Add to Contacts button will appear above the keypad.
Tap it to save the number to your Contacts.
2. Touch to close the phone keypad and to see if there are more
matching numbers or contacts. To browse through the filtered list, flick
through the list or slide your finger up or down the list slowly.
3. Touch the contact you want to call to place the call.
Note If the number you want to call does not appear on the screen, continue dialing
the number and then press CALL to place the call.
Tip During a call, press the VOLUME UP/DOWN buttons on the left panel of the
phone to adjust the in-call volume.