Filter
Top Products
Getting Connected 159
10.2 Connection Setup
Connection Setup configures your device’s data connections, such as
GPRS, WAP, and MMS, for you so that you do not need to enter the settings
manually onto your device. All you need to do is to select your network
operator, then Connection Setup does all the configuration for you.
To automatically detect the network operator
The first time you power on your
device, or when you insert a new
SIM card and then power on your
device, Connection Setup will display
a notification message to inform you
that it will automatically configure
your device.
1. Tap Yes on the notification message.
2. If your SIM card supports multiple network operator profiles, the next
message that appears will display network profile choices. Select the
profile you want to use and tap OK.
3. Next, you will be asked if you want to automatically configure your
device to the proper network settings. Tap Yes.
Connection Setup then starts to configure your device’s data
connection settings.
4. After the Connection Setup completes the configuration, tap Restart.
To manually select the network operator
You can also manually select your network operator from Connection
Setup’s settings screen. Connection Setup will then reconfigure your
device’s data connections settings based on the operator that you selected.
1. Tap Start > Settings > Connections tab > Connection Setup.
2.
Select the network Country and Operator you want to use and tap
OK
.
Note If you choose a Country and/or Operator that is different from the
installed SIM card network operator, you may not be able to access
network services.