Filter
Top Products
76 Setting Up Your PDA Phone
2
Press your finger against the fingerprint sensor.
Make sure the joint of your finger is touching
the gold contact of the fingerprint sensor.
3
While pressing firmly on the
fingerprint sensor, slide your finger
away from the device following the
direction of the arrow.
Enroll your fingerprint
When you turn on your device for the first time, the Quick Setup Wizard will
prompt you to enroll your fingers. Enrolling your fingers then activates the
fingerprint sensor on your device. You can however enable the fingerprint
sensor by launching
the HTC Fingerprint Manager software on your device.
The first time you use the HTC Fingerprint Manager software, a wizard
will guide you through enrolling your fingerprints and setting up data
protection.
To run the wizard
1. Tap Start > Settings > System tab > Lock.
2. On the Enroll screen, select which fingerprint you want to enroll by
tapping the corresponding finger on the screen. Tap Next.