Filter
Top Products
Experiencing Multimedia 189
Note If you set the Camera to save captured photos to a storage card, the prefix
cannot be selected. Captured photos will be named using the convention
IMAGnnnn.jpg (where ‘nnnn’ is the counter) which is the DCIM (Digital Camera
Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on
the storage card.
• Counter. To reset the file naming counter back to 1, tap Reset.
• Flicker Adjustment. When taking indoor shots, flicker on the camera screen
may be caused by inconsistencies between the vertical scan rate of the
camera display and the flicker frequency of fluorescent lighting. To reduce
flicker, you can change the flicker adjustment setting to Auto or to the proper
frequency (50Hz or 60Hz) of the power in the country where your device is
being used.
• Grid (Photo mode). Choose whether or
not to show a grid on the Camera screen.
Showing a grid helps you frame and center
your subject easily and accurately.
• Record with Audio (Video and MMS Video
mode). Select On to record audio with
the captured video clips, or select Off to
capture video without audio.
Grid marks
• Template (Picture Theme mode). Select a template.
• Recording Limit (Video mode). Set the maximum duration or file size for
recording video.
• Template Folder (Picture Theme mode). By default, templates are stored
in the \My Documents\Templates folder on the device’s Main Memory. If
you transferred some templates to a storage card (via File Explorer), set this
option to Main + Card to specify that templates are located in both the main
memory and the storage card.