Pocket PC Phone User Manual18
Pocket PC Phone User Manual 19
2.1 Starting Up
Turning Your Pocket PC Phone On and Off
To turn your device on:
Press the Power Button on the right side of the device. (The Pocket PC Phone will power
up and, if this is the rst time it has powered up, will automatically begin the initiation/
calibration process. See below for further details.)
To turn your device off:
Press the Power Button on the right side of the device.
Note: Turning your device off doesn’t turn the phone off. To turn the phone off, select the
GSM icon and select "Turn on ight mode".
Screen tapping and calibration
When you rst start up your Pocket PC, you will be asked to calibrate the screen by tapping
the center of a cross with your stylus as it moves around the screen. This process ensures
that when you tap the screen with your stylus, the tapped item is activated.
Re-calibrate the screen
If your Pocket PC Phone does not accurately respond to screen taps, you will need to
re-calibrate it:
1. Tap the Start menu > Settings > the System tab > Screen.
2. Tap the Align Screen button on the General tab to re-calibrate the screen as described
above.
Note: When aligning the touch screen, tap the target rmly and accurately.
