Filter
Top Products
User Guide for Kyocera KX440 Series Phones 21
If you see the symbol
1. Press to initiate a call to your
voicemail number.
2. Follow the prompts to retrieve the message.
Note: You can set the phone to beep, light up, or
play a tune every five minutes to remind you that
you have voicemail.
Locking the keypad
The Keyguard locks your keypad and side buttons on
your phone to prevent accidental keypresses when
the phone is turned on and a call is not in progress.
You can still answer or silence an incoming call.
• To lock the keypad, press and hold to the left.
• To unlock the keypad, press
in this order.
Changing the keyguard setting
1. Select Menu → Settings → Keyguard.
2. Highlight an option. You can set the phone to
lock the keypad immediately, or automatically
if no key is pressed after 30 seconds,
1minute, or 5minutes.
3. Press to save.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
1. Select Menu → Settings → Call Information.
2.
Select a timer:
–
Recent Calls—Tracks all calls made and
received by your phone since this timer
was last reset. To reset this timer, highlight
Reset and press .
–
All Calls Timer—Tracks all calls made and
received by your phone. This timer cannot
be reset.
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are on a call.
• Select
Menu → Settings → Sounds →
Minute Alert → Enabled.
Setting roaming alerts
and ringers
Setting an alert for roaming
You can set your phone to alert you with beeps
when you roam outside of your home service area.
1. Select Menu → Settings → Network →
Roam/Svc Alert.
2. Select an option and press .
– When no svc alerts you with three tones
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
–
Roam Change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
82-K5873-1EN.book Page 21 Monday, May 24, 2004 9:38 AM