Filter
Top Products
22 Making and Answering Calls
– Any Change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
1. Select Menu → Settings → Sounds →
Roam Ringer.
2. Highlight Enabled and press . You’ll hear
a sample of the ringer.
3. Press to set the ringer.
Setting Call Guard to avoid
roaming calls
You can set your phone to warn you before you
answer or place a call while roaming.
• Select
Menu → Settings → Convenience →
Call Guard → Call prompt.
The phone makes a distinctive ring to indicate an
incoming call while you are roaming, and you
must press to accept the call or to place a
call while roaming.
Controlling network roaming
Specifying digital or analog mode
You may force the phone into either digital or
analog mode. This is useful if you are in an area
that borders on digital service and the automatic
feature is causing the phone to keep switching
between modes.
1. Select Menu → Settings → Network →
Digital/Analog.
2. Select an option and press .
–
Automatic automatically switches the
phone between digital and analog.
–
Analog only sets the phone to work in
analog mode only.
–
Analog call forces a call into analog mode
for the duration of the next call.
–
Digital only sets the phone to work in
digital mode only.
Turning roaming on or off
This setting allows you to control the phone’s
roaming feature by specifying which signals the
phone will accept.
1. Select
Menu → Settings → Network →
Roam Option.
2. Select an option and press .
–
Automatic (recommended setting) accepts
any system the phone service provides.
–
No Roaming prevents you from making or
receiving calls outside of your home
service area.
Note: If your phone has more than one setting for
Automatic, contact your service provider to
determine which one to use.
82-K5873-1EN.book Page 22 Monday, May 24, 2004 9:38 AM