Filter
Top Products
Set up your phone
17
■ MiniSD card
To insert the miniSD, complete the following steps.
1. Slide open the phone and lift open the miniSD
slot cover.
2. Insert card firmly as shown in the illustration.
The card clicks into place.
To remove miniSD card, firmly press the card until it
releases from card slot and slides out.
Important: Do not remove the memory card
while reading or writing to the card. Doing
so may cause data corruption on the card or
the phone.
■ Turn your phone on or off
1. To turn your phone on or off, press and hold the
end key for at least 3 seconds.
2. Enter the lock code, if necessary, and select OK.
■ Connect the headset
A compatible headset, such as HS-5,
may be purchased with your phone
or separately as an enhancement.
See "Enhancement settings," p. 81
for information.
1. Plug the headset connector into the
Pop-Port™ connector at the bottom
end of your phone. appears on
the display.
2. Position the headset on your ear.
With the headset connected, you can
make, answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the call key to place a call.
• Press the end key to end a call.