Filter
Top Products
Settings
83
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK.
3. Select Phone lock and one of the following:
Off—Immediately turns off the phone lock feature.
Lock now—Immediately turns on the phone lock feature.
On power-up—Turns on the phone lock feature the next time you turn the
phone on.
If you select Lock now, you must enter your lock code before the phone will
function normally. After the lock code is accepted, your phone functions
normally.
Call not allowed appears if you attempt to place a call while your phone is locked.
To answer a call with phone lock on, select Answer, or press the call key.
Allowed number if lock active
With phone lock on, the only outgoing calls you can make are to the emergency
number programmed into your phone (for example, 911) and the numbers stored
in the Allowed no. if lock active location.
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK.
3. Select Allowed no. if lock active > Assign.
4. Enter the phone number, or select Search to retrieve the number from the
phone book; select OK.
To place a call to an allowed number when the phone is locked, enter the allowed
number and press the call key.
Change lock code
When changing the lock code, avoid using codes similar to emergency numbers
such as 911 to prevent accidental dialing of an emergency number.
By default, the preset lock code is the last four digits of your phone number.
Depending on your wireless service provider, the preset lock code may be a
four-digit number such as 1234 or 0000. If none of these work, contact your
wireless service provider for help.
If you enter an incorrect lock code five times in a row, your phone may ask you for
the security code. By default, the security code is the five-digit number, 12345.