Settings
61
4. Press the end key to return to
standby mode; then enter the
phone number, including any prefix
(such as 0 or 1) that your calling
card may require when you make a
calling card call. See your calling
card for instructions.
5. Press and hold the call key for a few
seconds until Card call is displayed.
6. When you hear the tone or system
message, select OK.
International prefix
If supported by your service provider,
you can store an international prefix
into your phone. When you enter + at
the beginning of a phone number, your
phone automatically inserts the
international prefix that you have
stored.
1. In standby mode, select Menu >
Settings > Call > International
prefix.
2. Enter the international prefix (for
example, 0011), and select OK.
3. In standby mode, enter + and the
phone number you want to call. For
example, +3546789.
The phone dials the international
prefix you have stored in your
phone and the phone number you
have entered. For example, the
phone dials 0011354789.
Data and fax calls
Receive data or fax calls
Data/fax calls is a network service.
See “Network Services”, p. ix for more
information.
If your wireless service provider or
network operator supports this feature,
you can set up the phone to send or
receive data or fax calls when a
terminal, such as a PDA or PC, is
connected.
For better performance during data
calls, place the phone on a stationary
surface. Do not move the phone by
holding it in your hand during a data
call.
For more information on connectivity,
refer to the PC/PDA Connectivity
Guide. The PC/PDA Connectivity Guide
can be downloaded from the Nokia
website at www.nokia-asia.com.
1. In standby mode, select Menu >
Settings > Call > Data/fax calls >
Incoming data/fax call and one of
the following:
General—The phone receives
incoming calls as usual.
Data calls only—The phone receives
only data calls.
Fax calls only—The phone receives
only fax calls.
2. Select Data calls only or Fax calls
only.
9244299_6265_en_au_oth.fm Page 61 Friday, November 18, 2005 11:54 AM
