Settings
64
DTMF tones are sent during an active
call. You can send them manually from
your phone keypad, or send them
automatically by saving them in your
phone.
Set type
In standby mode, select Menu >
Settings > Phone > DTMF tones >
Manual DTMF tones and one of the
following:
Continuous—The tone sounds for as
long as you press and hold a key.
Fixed—Used to send tones of the
duration you specify in the DTMF tone
length option.
Off—Used to turn off tones. No tones
are sent when you press a key.
Set length
You can also specify DTMF tone length
when using the Fixed option.
In standby mode, select Menu >
Settings > Phone > DTMF tones >
DTMF tone length > Short (0.1
seconds) or Long (0.5 seconds).
Start-up tone
If the Start-up tone is activated, the
tone sounds when you turn on your
phone. In standby mode, select
Menu > Settings > Phone > Start-up
tone > On or Off.
Help text activation
Your phone displays brief descriptions
for most menu items. When you arrive
at a feature or menu, pause for about
15 seconds and wait for the help text
to display. Scroll to page through the
full help text, if necessary.
The default setting for help text is on.
However, you can turn help text on or
off.
In standby mode, select Menu >
Settings > Phone > Help text
activation > On or Off.
■ Voice commands
You can set up to five Voice commands,
which allow hands-free operation of
certain phone features.
Add a voice tag
Before using Voice commands, you
must first add a voice tag to the phone
function.
1. In standby mode, select Menu >
Settings > Voice commands.
2. Select a function option you wish
to tag, and select Add.
3. Select Start, and speak the voice
tag clearly into the microphone.
Do not select Quit unless you want to
cancel the recording.
9244299_6265_en_au_oth.fm Page 64 Friday, November 18, 2005 11:54 AM
