Settings
71
Headset
In standby mode, select Menu >
Settings > Enhancements > Headset
and one of the following:
Default profile—Choose the profile you
wish to be automatically activated
when a headset is connected.
Automatic answer—Calls are answered
automatically after one ring when a
headset is connected. Select On or Off.
Note: Automatic answer will
only be active whilst “General”
profile is active
Handsfree
In standby mode, select Menu >
Settings > Enhancements > Handsfree
and one of the following:
Default profile—Choose the profile you
wish to be automatically activated
when a car kit is connected.
Automatic answer—Calls are answered
automatically after one ring when a
car kit is connected. Select On or Off.
Note: Automatic answer will
only be active whilst “General”
profile is active
Lights—Choose to keep the phone
lights always on, or to shut off
automatically after several seconds.
Select On or Automatic.
Loopset
A LPS-4 Loopset accessory allows your
device to optimise sound quality when
coupled with a hearing aid that is set
to T-coil mode.
In standby mode, select Menu >
Settings > Enhancements > Loopset >
Use Loopset > Yes or No.
If the Loopset is connected and
recognised through the Pop-Port™
connector, the phone automatically
uses the Loopset.
Charger
In standby mode, select Menu >
Settings > Enhancements > Charger
and one of the following:
Default profile—Select the profile you
want to automatically activate when
your phone is connected to the
charger.
Lights— Select On or Automatic to
keep the phone lights always on or to
shut off automatically after several
seconds.
Hearing aid
To optimise sound quality, you can set
your phone to couple to a T-coil-
equipped hearing aid.
In standby mode, select Menu >
Settings > Enhancements > Hearing
aid > T-coil hearing aid mode.
9244299_6265_en_au_oth.fm Page 71 Friday, November 18, 2005 11:54 AM
