Filter
Top Products
Settings
68
Set the date
In the standby mode, select Menu > Settings > Time and date > Date > Set the
date, enter the date, and select OK.
Change the format
1. In the standby mode, select Menu > Settings > Time and date > Date >
Date format and the format of your choice.
2. With Date on the display, select Date separator, and the separator of your choice.
Set the auto-update of date and time
Auto-update is a network service. See "Network services," p. 5 for more information.
If your wireless service provider supports this feature, you can allow the digital
network to set the clock, which is useful when you are out of your home area
(for example, when you have traveled to another network or time zone).
In the standby mode, select Menu > Settings > Time and date > Auto-update
of date/time > On, Confirm first, or Off.
If you use the Auto-update of date/time option while outside your digital network,
you may be prompted to enter the time manually. Network time will replace the
time and date when you reenter your digital network.
If your battery has been removed or has discharged outside the digital network,
you may be prompted to enter the time manually (once the battery is replaced or
recharged, and you are still outside of the digital network).
■ Call
Location info sharing
Location info sharing sets whether your GPS signal is always on or only in the
case of an emergency call.
In the standby mode, select Menu > Settings > Call > Location info sharing >
Emergency or On.
GPS should not be used for precise location measurement, and you should never
rely solely on location data from the GPS receiver.
This feature is not designed to support positioning requests for related calls.
Contact your service provider for more information about how your phone complies
with government regulations on location based emergency calling services.