Settings
75
Application vibration > On or Off—
Vibrate phone during an application.
■ Network
The menu options you see in your
phone are based on your service
provider’s network. The network
determines which options actually
appear in the phone menu. Check with
your service provider for more
information.
The Network menu personalises the
way your phone chooses a network in
which to operate while you are within
or outside of your primary or home
system. Your phone is set to search for
the most cost-effective network. If
your phone cannot find a preferred
network, it selects a network
automatically based on the option you
choose in the Network menu.
Roaming options
If supported by your wireless service
provider or network operator, you can
select which roaming option you wish
to use. In standby mode, select Menu >
Settings > Network > Roaming options
and the following:
Automatic—The phone automatically
searches for service in another digital
network. If one is not found, the phone
uses analog service. The roaming rate
applies when not in the home service
area.
Mode
If supported by your wireless service
provider or network operator, you can
choose whether your phone will use
digital or analog service. In standby
mode, select Menu > Settings >
Network > Mode and the following.
Digital only—You can make and receive
calls on a digital network only.
■ Network services
The following features are network
services. See also “Network Services”,
p. ix.
Store a feature code
Network feature setting allows you to
activate network services in your
phone using feature codes received
from your service provider.
1. In standby mode, select Menu >
Settings > Network services >
Network feature setting.
2. Enter the feature code from your
service provider (for example, *900
for activating Divert if busy), and
select OK.
3. Select Call divert.
4. Scroll to the type of forwarding
that matches the feature code you
entered (for example, Divert if
busy), select Activate.
9244299_6265_en_au_oth.fm Page 75 Friday, November 18, 2005 11:54 AM
