Contacts
39
Note: Using voice tags may be
difficult in a noisy
environment or during an
emergency, so you should not
rely solely upon voice dialling
in all circumstances.
Assign a voice tag
To use voice dialling, you must first
assign a voice tag to a number.
1. In standby mode, scroll down to
display your list of contacts.
2. Highlight a contact, select Details.
3. Highlight the number you want to
assign a voice tag, select Options >
Add voice tag.
4. Select Start, then speak clearly into
the microphone. Do not select Quit
unless you want to cancel the
recording.
5. After you finish speaking, the
phone automatically stops
recording, saves, and replays the
voice tag.
appears next to the phone
numbers which have voice tags
assigned.
Use a voice tag
1. In standby mode, select and hold
Names.
2. When you hear several beeps and
Speak now appears, release the key.
3. Pronounce the voice tag clearly
into the microphone.
When the phone finds the voice
tag, a notification appears, and the
phone automatically dials the
number. If the phone does not
locate a number or recognise the
voice tag, No match found appears.
Play back a voice tag
1. In standby mode, select Menu >
Contacts > Voice tags.
2. Select the voice tag you want to
play back, and select Playback.
Modify a voice tag
1. In standby mode, select Menu >
Contacts > Voice tags.
2. Select the voice tag you want to
change, and select Change.
3. Select Start, and speak clearly into
the microphone. The phone repeats
your voice tag, and Voice tag
changed appears.
9244299_6265_en_au_oth.fm Page 39 Friday, November 18, 2005 11:54 AM
