Filter
Top Products
Show call duration — Display the length
of a call during the call.
Summary after call — Display the length
of a call after the call.
Speed dialling — Activate speed dialling.
Anykey answer — Activate anykey
answer.
Line in use — This setting (network
service) is shown only if the SIM card
supports two subscriber numbers, that is,
two phone lines. Select which phone line
you want to use for making calls and
sending text messages. Calls on both lines
can be answered irrespective of the
selected line. If you select Line 2 and have
not subscribed to this network service,
you are not able to make calls. When line
2 is selected,
is displayed in the home
screen.
Line change — Prevent line selection
(network service), if supported by your
SIM card. To change this setting, you need
the PIN2 code.
Network settings
Select
> Settings > Settings and
Phone > Network.
To select the network mode, select
Network mode and Dual mode, UMTS,
or GSM. In dual mode, the device switches
automatically between networks.
Tip: Selecting UMTS enables faster data
transfer, but may increase the demand on
battery power and reduce the battery life.
In regions close to both GSM and UMTS
networks, selecting Dual mode may
cause constant jumping between the two
networks, which also increases the
demand on battery power.
To select the operator, select Operator
selection and Manual to select from
available networks, or Automatic to set
the device to select the network
automatically.
To set the device to indicate when it is
used in a microcellular network (MCN),
select Cell info display > On.
Telephone 29
© 2010 Nokia. All rights reserved.