Filter
Top Products
Settings
Application settings
Select
> Settings > Settings and
Applications.
Select an application from the list to
adjust its settings.
Device and SIM card security
Select
> Settings > General >
Security.
To change the PIN code, select Phone and
SIM card > PIN code. The new code must
be 4 to 8 digits long. The PIN code protects
your SIM card against unauthorised use
and is provided with the SIM card. After
three consecutive incorrect PIN code
entries, the code is blocked, and you need
to use the PUK code to unblock it before
you can use the SIM card again.
To set the keypad to lock automatically
after a defined period, select Phone and
SIM card > Keypad autolock period.
To set a time-out period after which the
device is automatically locked and can be
used only if the correct lock code is
entered, select Phone and SIM card >
Phone autolock period. Enter the length
of the time-out period in minutes, or
select None to deactiveate the autolock
feature. When the device is locked, you
can still answer incoming calls, and calls
may still be possible to the official
emergency number programmed into
your device.
To change the lock code, select Phone
and SIM card > Lock code. The default
lock code is 12345. Enter the current code
and then the new code twice. The new
code must be 4-255 characters long.
Alphanumeric (uppercase and lowercase)
characters can be used. The device notifies
you if the lock code is not properly
formatted.
Common accessory settings
Select
> Settings > Settings and
General > Enhancement.
With most accessories, you can do the
following:
To define which profile is activated when
you attach an accessory to your device,
select the accessory and Default profile.
To set the device to answer phone calls
automatically after 5 seconds when an
accessory is attached, select Automatic
answer > On. If the ringing type is set to
Beep once or Silent in the selected
profile, automatic answering is disabled.
To illuminate the device while it is
attached to an accessory, select Lights >
On.
The available options may vary depending
on the accessory.
Restore original settings
To restore the original device settings,
select
> Settings > Settings and
General > Factory settings. To do this,
you need your device lock code. After
resetting, the device may take a longer
time to switch on. Documents, contact
Settings 77
© 2010 Nokia. All rights reserved.