Filter
Top Products
without your knowledge. No separate
acceptance or authorisation is needed.
Use this status only for your own devices,
such as your compatible headset or
computer, or devices that belong to
someone you trust. If you want to accept
connection requests from the other device
separately every time, select Set as
unauthorised.
To use a Bluetooth audio accessory, such
as a Bluetooth handsfree or headset, you
need to pair your device with the
accessory. For the passcode and further
instructions, see the accessory user guide.
To connect to the audio accessory, switch
on the accessory. Some audio accessories
connect automatically to your device.
Otherwise, open the paired devices tab,
and select the accessory and Options >
Connect to audio device.
Block devices
Select
> Settings > Connectivity >
Bluetooth.
1 To block a device from establishing a
Bluetooth connection to your device,
open the paired devices tab.
2 Select a device you want to block and
Options > Block.
To allow the pairing of a device again after
it was blocked, delete it from the blocked
devices list.
Open the blocked devices tab, and select
Options > Delete.
If you reject a pairing request from
another device, you are asked if you want
to block all future connection requests
from this device. If you accept the query,
the remote device is added to the list of
blocked devices.
Data cable
To avoid damaging the memory card or
corrupting data, do not disconnect the
USB data cable during a data transfer.
Transfer data between your device and
a PC
1 Insert a memory card in your device,
and connect the device to a
compatible PC using the USB data
cable.
2 When the device asks which mode to
use, select Mass storage. In this
mode, you can see your device as a
removable hard drive in the PC.
3 Transfer the desired data between the
PC and your device.
4 End the connection from the PC (for
example, from an Unplug or Eject
Hardware wizard in Windows) to
avoid damaging the memory card.
To modify the USB mode settings, select
> Settings > Connectivity > USB.
To change the USB mode you normally use
with the data cable, select USB
connection mode.
To set the device to ask which mode to use
each time you connect the USB data cable
to the device, select Ask on
connection > Yes.
To use Nokia PC Suite with your device,
install Nokia PC Suite on your PC, connect
the USB data cable, and select PC Suite.
46 Connectivity
© 2010 Nokia. All rights reserved.