A Bluetooth connection is disconnected
automatically after sending or receiving
data. Only Nokia Ovi Suite and some
accessories such as headsets may
maintain a connection even if not actively
used.
Pair devices
Select
> Settings > Connectivity >
Bluetooth.
Open the paired devices tab.
Before pairing, decide on your own
passcode (1-16 digits), and agree with the
user of the other device to use the same
code. Devices that do not have a user
interface have a fixed passcode. You need
the passcode only when you connect the
devices for the first time. After pairing, it
is possible to authorise the connection.
Pairing and authorising the connection
makes connecting quicker and easier, as
you do not have to accept the connection
between paired devices every time you
establish a connection.
The passcode for remote SIM access must
have 16 digits.
In remote SIM mode you can use your
device's SIM card with compatible
accessories.
When the wireless device is in the remote
SIM mode, you can only use a compatible
connected accessory, such as a car kit, to
make or receive calls.
Your wireless device will not make any
calls, except to the emergency numbers
programmed into your device, while in
this mode.
To make calls, you must first leave the
remote SIM mode. If the device has been
locked, enter the lock code to unlock it
first.
1 Select Options > New paired
device. The device starts to search for
Bluetooth devices within range. If you
have sent data using Bluetooth
connectivity before, a list of the
previous search results is displayed.
To search for more Bluetooth devices,
select More devices.
2 Select the device with which you want
to pair, and enter the passcode. The
same passcode must be entered in the
other device as well.
3 To make the connection between
your device and the other device
automatic, select Yes. To confirm the
connection manually every time a
connection attempt is made, select
No. After pairing, the device is saved
to the paired devices page.
To give a nickname to the paired device,
select Options > Assign short name. The
nickname is displayed in your device.
To delete a pairing, select the device
whose pairing you want to delete and
Options > Delete. To delete all pairings,
select Options > Delete all. If you are
currently connected to a device and cancel
the pairing with that device, pairing is
removed immediately, and the
connection is ended.
To allow a paired device to connect
automatically to your device, select Set as
authorised. Connections between your
device and the other device can be made
Connectivity 45
© 2010 Nokia. All rights reserved.