Filter
Top Products
Make calls
82
To end the video call, press .
Video sharing
Use Video sharing (network service) to send live video or
a video clip from your mobile device to another
compatible mobile device during a voice call.
The loudspeaker is active when you activate Video
sharing. If you do not want to use the loudspeaker for the
voice call while you share video, you can also use a
compatible headset.
Video sharing requirements
Because Video sharing requires a UMTS connection, your
ability to use Video sharing depends on the UMTS
network availability. Contact your service provider for
more information on the service and network availability,
and fees associated with using this service.
To use Video sharing you must do the following:
• Ensure that your device is set up for person-to-person
connections. See ‘Settings’, p. 82.
• Ensure you have an active UMTS connection and are
within UMTS network coverage. See ‘Settings’, p. 82. If
you start the sharing session while you are within
UMTS network coverage and a handover to GSM
occurs, the sharing session is discontinued, but your
voice call continues. You cannot start Video sharing if
you are not within UMTS network coverage.
• Ensure that both the sender and recipient are
registered to the UMTS network. If you invite someone
to a sharing session and the recipient’s device is not
within UMTS network coverage, or does not have Video
sharing installed or person-to-person connections set
up, the recipient does not know that you are sending an
invitation. You receive an error message that the
recipient cannot accept the invitation.
Settings
Person-to-person connection settings
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile settings
must be configured in your device before you can use
Video sharing.
Ask your service provider for the SIP profile settings, and
save them in your device. Your service provider may send
you the settings over the air or give you a list of the needed
parameters.
If you know a recipient’s SIP address, you can enter it on
the person’s contact card. Open Contacts from your device
main menu, and open the contact card (or start a new card
for that person). Select Options > Add detail > SIP or
Share view. Enter the SIP address in the format