Filter
Top Products
Camera
32
• To send the image using multimedia, e-mail, Bluetooth
connectivity, or upload it to your online album, press
the call key, or select Send. For more information, see
‘Messaging’, p. 67, ‘Bluetooth connectivity’, p. 58, and
‘Online sharing’, p. 42. This option is not available
during an active call. You can also send the image to a
call recipient during an active call. Select Send to
caller (only available during an active call).
• To tag images to the Print basket for later printing,
select Add to Print Basket.
• To print the picture, select Print. See ‘Image print’,
p. 41.
• To return to the viewfinder to capture a new image,
press , or select Back.
To use the picture as wallpaper in the active standby,
select Options > Set as wallpaper.
To set the image as a call image for a contact, select Set
as contact call image.
Still image camera settings
There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust Image setup,
see ‘Setup settings—color and lighting’, p. 33. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
Image quality— Print 2M - Large (1600x1200
resolution), Print 1M - Small (1152x864 resolution) or
MMS 0.3M - Small (640x480 resolution) If you want to
print the image, select Print 2M - Large. If you want to
send it through e-mail, select Print 1M - Small. To send
the image through MMS, select MMS 0.3M - Small.
These resolutions are only available in the main camera. In
the secondary camera, the resolution is always MMS
0.3M - Small.
Add to album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list of
available albums opens.
Show captured image—Select Yes if you want to see the
captured image after it is taken, or No if you want to
continue taking pictures immediately.
Default image name—Define the default name for the
captured images.
Extended digital zoom (main camera only)—Select On to
allow the zoom increments to be smooth and continuous
between digital and extended digital zoom. If you want to
limit the zoom to where the selected image quality is
maintained, select Off.