Nokia N90-1 Cell Phone User Manual


 
Copyright
©
2005 Nokia. All rights reserved.
Your Nokia N90
19
You cannot use the memory card if the door of the memory
card slot is open.
Important: Do not remove the memory card in the
middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as
the device, and data stored on the card may be
corrupted.
To back up information from phone memory to a memory
card, select Options > Backup phone mem.
To restore information from the memory card to the phone
memory, select Options > Restore from card.
Tip! To rename a memory card, select Options >
Memory card name.
Format a memory card
When a memory card is reformatted, all data on the card
is permanently lost.
Some memory cards are supplied preformatted and others
require formatting. Consult your retailer to find out if you
must format the memory card before you can use it.
To format a memory card, select Options > Format mem.
card. Select Yes to confirm. When formatting is complete,
enter a name for the memory card, and select OK.
Useful shortcuts
Use shortcuts to quickly get the most from your device.
Refer to the relevant sections in this user guide for further
details of the functions.
Shortcuts when taking pictures
To zoom in and out, press the joystick up and down.
To enter the Image setup settings, press the joystick.
To change the flash mode, press the joystick left or
right.
After you have taken a picture, to take a new picture,
press the capture key halfway down.
If you have activated an application in the Imaging
mode, press the capture key to return to the camera.
Shortcuts when recording videos
To zoom in or zoom out, press the joystick up or down.
To enter the Video setup settings, press the joystick.
If you have activated an application in the Imaging
mode, press the capture key to return to the camera.
Edit text and lists
To mark an item in a list, scroll to it, and press and
at the same time.
To mark multiple items in a list, press and hold ,
while you press or . To end the selection, release
, then release .