Filter
Top Products
Copyright
©
2005 Nokia. All rights reserved.
Make calls
29
Icons:
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your device. To
send a still image instead, see "Call settings", p. 107.
1 To start a video call, in the
Fold open mode, enter the
phone number in the
standby mode, or select
Contacts, and select a
contact.
2 Select Options > Call >
Video call.
3 Activate the Imaging mode
after the call recipient has
answered the call.
Starting a video call may take a while. Waiting for image
is shown. If the call is not successful (for example, video
calls are not supported by the network, or the receiving
device is not compatible) you are asked if you want to try
a normal call or send a message instead.
The video call is active when you see two video images, and
hear the sound through the loudspeaker. The call recipient
may deny video sending ( ), in which case you hear the
sound and may see a still image or a grey background
graphic.
Tip! To increase or decrease the volume during a call,
in the Fold open mode, press or , or in the
Imaging mode, move the joystick left or right.
To change between showing video or hearing only sound,
select Enable/Disable > Sending video (Imaging mode
only), Sending audio or Sending audio & video (Imaging
mode only).
To send live video image of yourself, turn the camera unit
so that the lens is facing you.
To zoom your own image, move the joystick up and down
to zoom in and zoom out. The zoom indicator is shown on
the top of the display.
To switch the places of the sent video images on the
display, select Change image order.
If you activate the Fold open mode during a video call,
sending your own video image stops because the camera is
not active. You can, however, still see the video of the
recipient.
Note: Even if you have denied video sending during
a video call, the call will still be charged as a video
call. Check the pricing with your network operator
or service provider.
To end the video call, press .