Filter
Top Products
Settings
116
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
To change the settings for a TV-Out connection, select
TV-Out and from the following:
Default profile—Set the profile that you want activated
each time you connect a Nokia Video Connectivity Cable
to your device.
TV screen size—Select the aspect ratio of the TV: Normal
or Widescreen for widescreen TVs.
Tv system—Select the analog video signal system that is
compatible with your TV.
Flicker filter—To improve image quality on the screen of
your TV, select On. The flicker filter may not diminish
image flicker on all TV screens.
Security
To edit settings related to the security, press , and
select Tools > Settings > General > Security > Phone
and SIM card, Certificate management, or Security
module.
Phone and SIM card
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See ‘Glossary of PIN
and lock codes’, p. 117.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Keypad autolock period—Select whether the keypad is
locked when your device has been idle for a certain period
of time.
Phone autolock period—To avoid unauthorized use, you
can set a time-out after which the device automatically
locks. A locked device cannot be used until the correct lock
code is entered. To turn off the autolock period, select
None.
See ‘Glossary of PIN and lock codes’, p. 117.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press . A list of
commands opens. Select Lock phone.
Lock keys if slide closed—Select whether the keypad is
locked when you close the 2-way slide.