Nokia N95-1 Cell Phone User Manual


 
Camera
51
In the active toolbar, select from the following options:
Video scenes
Automatic ( )(default) and Night ()
Image scenes
Auto () (default), User defined (), Close-up
mode(), Portrait (), Landscape (), Sports (),
Night (), and Night portrait ().
When you take pictures, the default scene is Auto. You can
select the User defined scene as the default scene.
To make your own scene suitable for a certain
environment, scroll to User defined, and select Options >
Change. In the user defined scene you can adjust different
lighting and color settings. To copy the settings of another
scene, select Based on scene mode and the desired scene.
Take pictures in a sequence
The sequence mode is available only in the main camera.
To set the camera to take six pictures or more in a
sequence (if enough memory available), in the active
toolbar, select Switch to sequence mode > Burst to take
six pictures, or the time period for taking pictures. The
number of pictures taken depends on the available
memory.
To take six pictures, press the capture key. To stop taking
pictures, press Cancel. To take more than six pictures,
press and hold the capture key. To stop taking pictures,
release the capture key. You can capture up to 100 images,
depending on the available memory.
To use a time period for taking pictures, select Switch to
sequence mode, and a time preriod. To start taking
pictures, press the capture key. To stop taking pictures
before the time ends, press the capture key again.
After you take the pictures, they are shown in a grid on the
display. To view a picture, press to open it. If you used
a time period for taking pictures, the last taken picture is
shown on the display. To view other pictures, press
.
You can also use the sequence mode with the self-timer.
When using the self-timer, the maximum amount of
pictures is six pictures.
To return to the sequence mode viewfinder, press the
capture key.
You in the picture—self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
in the active toolbar, select Self timer > 2 seconds, 10