Filter
Top Products
Connections
26
When the device is in the Offline profile, you can still use
wireless LAN (if available). Remember to comply with any
applicable safety requirements when establishing and
using a wireless LAN connection.
Tip! To check the unique media access control (MAC)
address that identifies your device, enter
*#62209526# in the standby mode.
WLAN wizard
The WLAN wizard helps you to connect to a wireless LAN
and manage your wireless LAN connections.
The WLAN wizard shows the status of your wireless LAN
connections in the active standby mode. To view the
available options, scroll to the row showing the status,
and press .
If the search results of found wireless LANs, for example,
WLAN network found are displayed, to create an
internet access point and start the web browser using this
IAP, select the status, the option Start web browsing, and
the network.
If you select a secured wireless LAN network, you are
asked to enter the relevant passcodes. To connect to a
hidden network, you must enter the correct network name
(service set identifier, SSID).
If you are connected to a wireless LAN, the internet access
point name and [08]' connected are displayed. To start
the web browser using this IAP, select the status and the
option Cont. Web browsing. To end the connection in the
wireless LAN, select the status and the option Disconnect
WLAN.
If wireless LAN scanning is off and you are not connected
to any wireless LAN, WLAN scanning off is displayed. To
set scanning on and search for available wireless LANs,
select the status WLAN scanning off.
To start a search for available wireless LANs, select a status
and the option Search for WLAN. To set wireless LAN
scanning off, select a status and the option Switch WLAN
scan off.
To access the WLAN wizard in the menu, press , and
select Tools > WLAN wiz.
Wireless LAN access points
To search for wireless LANs available within range, press
, and select Tools > WLAN wiz.. To create an internet
access point in a wireless LAN, select Options > Define
access point. To view the details of a network shown in the
list, select Options > Details.
When an application asks you to select an access point,
select the created access point. You can also create an
internet access point by selecting Search for WLAN.