Filter
Top Products
[ 41 ]
Settings
4
Phone and SIM
Explanations for the different security codes that may be needed:
•
PIN code (4 to 8 digits)
- The PIN (Personal Identification Number)
code protects your SIM card against unauthorized use. The PIN code
is usually supplied with the SIM card. After three consecutive incorrect
PIN code entries, the PIN code is blocked. If the PIN code is blocked,
you need to unblock the PIN code before you can use the SIM card
again. See the information about the PUK code below.
•
PIN2 code (4 to 8 digits)
- The PIN2 code, supplied with some SIM
cards, is required to access some functions, such as call cost counters.
•
Lock code (5 digits)
- The lock code can be used to lock the phone
and keypad to avoid unauthorized use.
Note:
The factory setting for the lock code is
12345
. To avoid unauthorized
use of your phone, change the lock code. Keep the new code secret
and in a safe place separate from your phone.
•
PUK and PUK2 codes (8 digits)
- The PUK (Personal Unblocking Key)
code is required to change a blocked PIN code. The PUK2 code is
required to change a blocked PIN2 code. If the codes are not supplied
with the SIM card, contact the operator whose SIM card is in your
phone for the codes.
You can change the following codes: lock code, PIN code, and PIN2 code.
These codes can only include the numbers from
0
to
9
.
Note:
Avoid using access codes similar to the emergency numbers, such
as 911, to prevent accidental dialing of the emergency number.
PIN code request
- When the PIN code request is active, the code is requested
each time the phone is switched on. Note that deactivating the PIN code
request may not be allowed by some SIM cards.
PIN code
/
PIN2 code
/
Lock code
- Open this setting if you want to change
the code.
Tip:
To lock the phone manually, press . A list of commands opens.
Select
Lock phone
.