[ 164 ]
port is selected for the infrared connection. If no port is selected,
select the COM port with infrared as the connection type. Note that
you can select more than one COM port.
Note: If you cannot select the port you want to use, another PC
application is using that port. To use PC Suite with that port, you
must either close the other application or disable it temporarily.
3 Make sure that the infrared port of the phone faces the infrared port
of the PC and that they are within range of each other.
4 Activate the infrared connection of your phone. Go to Menu, open the
Connectivity folder, and select Infrared.
Use a Bluetooth connection
Note: Before you can connect your Nokia 3650 phone to the PC via
Bluetooth for the first time, you must have provided a name for
your phone to be used in a Bluetooth connection. For instructions
on giving a name to your phone, see the chapter on connectivity
in this user guide. Make sure that Bluetooth is activated on the
phone to make your Nokia 3650 phone discoverable and
connectable. Go to Connectivity and select Bluetooth. Then
select Bluetooth On. To make your phone discoverable, change My
phone’s visibility to Shown to all in the Bluetooth menu.
To establish a Bluetooth connection:
1 Make sure that a Bluetooth card is inserted in the PC card or
CompactFlash (CF+) slot and that the software provided with the
Bluetooth card is installed on the PC, or check that your PC includes
built-in support for Bluetooth. A serial port profile must exist for the
Bluetooth card on the PC. For further information, see the user
documentation provided with the Bluetooth card or PC.
2 Establish a serial port connection between your Nokia 3650 phone
and your PC. For information on how to do this, refer to the user
documentation of the Bluetooth software.
3 Double-click the PC Suite Connection icon on the taskbar to open the
Connection Properties dialog box. Make sure that the correct port is
selected for the Bluetooth connection. If no port is selected, select the
COM port with Bluetooth as the connection type. Note that you can