[ 38 ]
2
Note: When no more charging units or currency units are left, calls may
only be possible to the emergency number programed into your
phone (e.g. 911 or other official emergency number).
SET A CALL COST LIMIT FOR YOURSELF
1 Select Options → Settings → Call cost limit → On.
2 The phone requests you to enter the limit in units. For this you may
need the PIN2 code. Depending on the Show costs in setting, enter
either the amount of charging units or currency.
When the charging limit you have set yourself is reached, the counter
stops at its maximum value and the note Reset all calls' cost counter is
displayed. To be able to make calls, go to Options → Settings → Call cost
limit→ Off. For this you need the PIN2 code, see “Security” on page 55.
Erase call cost counters - Select Options → Clear counters. For this you
need the PIN2 code. To clear an individual event, scroll to it and press .
GPRS data counter
Go to Log→ GPRS counter.
Allows you to check the amount of data sent and received during packet
data (GPRS) connections. For example, you may be charged for your GPRS
connections by the amount of data sent and received.
View the general log
Go to Menu→ Log and press .
In the general log, for each communication event, you can see the sender
or recipient name, phone number, name of the service provider, or access
point.
Note: Sub-events, such as a short message sent in more than one part
and packet data connections, are logged as one communication
event.
